|
Like
sentries, these remote controlled monitors are engineered to
stand guard over industrial complexes, refineries, chemical
plants, loading docks, tanker berthings, railroad yards,
offshore platforms, etc. The instant the monitor is needed for
fire protection or actual firefighting, it can be activated from
a remote location where the operator can turn on the water
supply; direct the monitor vertically or horizontally; and
change the stream pattern of the nozzle; all from a safe
distance. There is even an option that allows the monitor to
oscillate automatically, thus freeing the operator to tend other
duties.
The system includes a monitor with nozzle, a valve box
complete with hydraulic pump/motor/tank unit, and a control box
with complete panel of function switches. Both the valve box and
control box are available in either stainless steel NEMA 4X for
unclassified areas or cast aluminum NEMA 7/4 for Class 1, Group
B, C & D, Division 1 area classification. Several monitors
can be operated from one control station with the option of a
secondary control station at another remote location. The system
is flexible enough to fit your requirements. |
|
 |
294-11XBHC
Brass Remote Controlled Monitor
Rugged, corrosion-resistant, cast brass construction for
years of dependable service in all environments - Horizontal and
vertical movements are driven by powerful hydraulic actuators
with enough torque to move the monitor even under the most
adverse conditions - These actuators have built-in, hydraulic
flow controlling, adjustable needle valves and are constructed
of materials suitable for salt water atmosphere - Vertical
actuator allows movement of 150 degrees (90 degrees above to 60
degrees below horizontal) - Horizontal actuator is available for
rotation of 90, 180, 270 and 360 degrees (please specify) - All
ball races are furnished with bronze balls and have grease zerks
for easy lubrication - Both vertical and horizontal spur gears
have safety covers - Furnished with SM-100HBP automatic nozzle
for flows up to 1000 GPM - Pattern is changed from straight
stream to wide fog by means of a hydraulic piston with a flow
control needle valve - Monitor can be installed at ground level
or in elevated location - Can also be utilized on fire boats or
work boats - Finish red acrylic/urethane enamel. |
|
| 299-20XHC
Stainless Steel Remote Controlled Monitor
Constructed of seamless, #304 stainless steel tubing
(3.5" ID) with cast stainless steel swivel joints for
years of dependable service in all environments - Horizontal
and vertical movement are driven by powerful hydraulic
actuators with enough torque to move the monitor even under
the most adverse conditions - These actuators have built-in
hydraulic flow controlling, adjustable needle valves and are
constructed of materials suitable for salt water atmosphere -
Vertical actuator allows movement of 150 degrees (90 above to
60 below horizontal) - Horizontal actuator is available for
rotation of 90, 180, 270 and 360 degrees (please specify) -
All ball races are furnished with stainless steel balls and
have grease zerks for easy lubrication - Both vertical and
horizontal spur gears have safety covers - Furnished with CJK-HP
combination fog nozzle for flows of 1250, 1500, 1750 and 2000
GPM (please specify) - Pattern is changed from straight stream
to wide fog by means of two hydraulic pistons with a flow
control, needle valve - Monitor can be installed at ground
level or in elevated location - Can also be utilized on fire
boats and work boats - Finished red acrylic/urethane enamel |
 |
|
 |
Valve
Box / Hydraulic Source
Contains three 4-way, solenoid activated hydraulic valves
and the hydraulic pump/motor/tank unit to power one monitor -
Wired with terminal strips for easy electrical hookup - All
hydraulic connections plumbed with .375-OD tube fittings -
Hydraulic pump/motor/tank unit is a 24VDC motor; a gear pump
with built-in check valve, relief valve, and pressure gauge;
and a 46 cu. in. reservoir with removable stainless steel
filter - Furnished in NEMA 4X stainless steel for unclassified
areas or in NEMA 7/4 cast aluminum for Class I, Group B, C,
& D, Division 1 & 2 - Finish natural metal |
|
| Master
Control Box/Panel
Contains controls for monitor (or up to 6 monitors)
functions - Standards controls include: Standby pilot light;
on/off main power push button with pilot light; monitor
left/right and up/down (joy stick in NEMA 4X box-switches in
NEMA 7/4 box); and nozzle fog/straight stream switch -
Optional automatic oscillating switch - Main power is
terminated at valve box - Standard power requirement is
90-132 VAC/180-264VAC, 47-63 Hz., single phase, 264VA -
Power from valve box to control box is 24VDC - Maximum
distance from valve box to control box is 3000' - Furnished
with terminal strip for convenient electrical hookup -
Furnished in NEMA 4X stainless steel for unclassified areas
or in NEMA 7/4 cast aluminum for Class I, Group B, C, &
D, Division 1 & 2 - Finish natural metal |
 |
|
| Secondary
Control Box/Panel (Not Shown)
Optional control box for use at a secondary location -
Identical to master control box. |
|
|
|
|