This elevated remote control monitor is designed so that the horizontal and vertical movement of the upper assembly can be controlled at ground level - By utilizing two 15" cast brass handwheels, the monitor can be rotated 360 degrees and the vertical position can be adjusted from 90 degrees above to 60 degrees below horizontal - The CJ-B-RC nozzle, which is standard equipment on this unit as well as a stream shaper tube, can be adjusted by means of its cable control - Upper monitor unit is constructed of rugged cast brass with chrome plated brass worm gear and stainless steel worm drive shaft - It is0 designed to flow up to 1000 GPM and has a 4.0" NPT female inlet and a 2.5" NHT outlet - Grease zerks are furnished at swivel joints for easy lubrication - Lower base unit is constructed of rugged cast brass with chrome plated brass worm gear and drive shaft - It has a double row of bronze bearings for smooth operation and a Teflon bearing surface on which the weight of the upper unit rides - Grease zerks are furnished for easy lubrication and the gear assembly is protected by a molded urethane weather guard - Base unit is standard with a 4.0"-150# ANSI flange inlet and a 4.0" NPT female outlet - A 4.0" NPT female inlet is optional - Upper handwheel assembly is constructed of rugged cast brass with cadmium plated miter gears and stainless steel drive shaft - It is furnished with U-bolts to attach to the 4.0" riser pipe - Complete 294-11RC can be fabricated to a height of 34' - Customer to furnish 4.0" riser pipe and .750" brass or stainless steel drive rod between upper and lower units - Customer also responsible for sufficiently supporting standpipe on which monitor is mounted (contact our engineering department for guidelines and recommendations) - 295 support bearing must be used above lower base unit when: 500 GPM is flowed with elevation above 20'; or when 750 GPM is flowed with elevation above 15'; or when 1000 GPM is flowed with elevation above 10' - Monitor is furnished with CJ-B-RC nozzle and 282B stream shaper - Optional with 282B stream shaper and 181 deluge tip - Finish red acrylic/urethane enamel with satin brass trim - Weight, 224lbs.with stream shaper and nozzle.

This elevated remote controlled monitor is designed so that the horizontal and vertical movement can be controlled at ground level - By utilizing two chain drive wheels the monitor can be rotated 360 degrees and the vertical can be adjusted from 90 degrees above to 60 degrees below - The monitor will flow up to 1000 GPM and is constructed of rugged cast brass with chrome plated brass worm gears and stainless steel worm drive shafts - Grease zerks are furnished at swivel joints for easy lubrication - The chainwheels and chain guides are aluminum alloy (brass available upon request) - Available with 4.0" NPT female or 4.0" 150# ANSI flange base (please specify) - Monitor furnished with CJ-B-RC nozzle and 282B stream shaper (CJN-B-RC nozzle optional at additional cost) - Optional with 282B stream shaper and 181 deluge tip - Customer furnishes and is responsible for integrity of the standpipe on which monitor is mounted (contact our engineering department for guidelines and recommendations) - Customer also furnishes chain for operating monitor (.250" non-metallic aluminum chain, McMaster-Carr part number 3620T21) - Finish red acrylic/urethane enamel with satin brass trim - Weight, 139 lbs. with stream shaper and nozzle.

A pre-fabricated free-standing elevated monitor which utilizes the flow-efficient 299-11 "Python" monitor - Availble in 10', 15', 20', 25', 30' and 40' heights - Flow-efficient, tubular steel riser pipe allows for flows up to 750 GPM - Tubular steel horizontal drive sleeve allows for continuous 360 degree rotation - Vertical movement from 45 degrees above to 35 degrees below horizontal is controlled by vinyl coated stainless steel cables - Two handwheel driven friction locks allow for stable positioning of the monitor - 2.5" NHT male outlet and 4.0"-150# or 6.0"-150# ANSI flange base - Optional CJ-B-RC or CJN-B-RC remote controlled nozzles are ideal for use on these monitors - Also optional with 282B stream shaper and 181 deluge tip - Units shipped assembled (25', 30' and 40' units shipped in two assembled sections, each requiring two field welds) - Finish red acrylic/urethane enamel.