|
Gear Actuated
|
| 2920G
2.0" Gear Actuated Apparatus Valve (Not Shown)
Same as 2925G except 2.0" full flow waterway - Choose
from 10 optional end caps - Weight 17.50 lbs.
|
|
| 
Shown
with optional
VPI kit. |
2925G
2.5" Gear Actuated Apparatus Valve
Rugged, cast brass construction - Full flow 2.5"
waterway - Dual UHMWPE seats (Bi-directional) - Acetal valve
ball - Gear case constructed of rugged, cast brass and
completely sealed - Segmental gear constructed of
aluminum/bronze - Worm gear is polished, hardened steel with
stainless steel shaft - Gear ratio is 38:1 for easy operation
and precise flow/pressure control - Precision needle thrust
bearings for low input torque and long term service - Rugged,
positive travel limit stops - Gear case can be easily
repositioned at time of installation for best control access -
Furnished with 5.0" polished chrome remote handwheel
complete with two (2) weather-sealed U-joints and one (1)
thru-the-panel bushing - Choose from 39 end cap options - Cast
finish on valve with polished handwheel assembly - Weight 24.875
lbs.
|
|
| 2930G
3.0" Gear Actuated Apparatus Valve
Same as 2925G except 3.0" full flow and six (6) bolt end
caps - Choose from 29 end cap options - Weight 28.75 lbs.
|
 |
|
|  |
2940G
4.0" Gear Actuated Apparatus Valve
Same as 2925G except 4.0" size, one UHMWPE seat, brass
valve ball, and 6.5" polished chrome handwheel - Choose
from 7 end cap options - Weight 37.625 lbs.
|
|
Valve
Position Indicator Kit
This optional Valve Position Indicator (VIP) Kit allows the
pump operator to see the position of each gear operated valve at
a glance; Red indicates fully closed; Green indicates fully
open; and Yellow indicates a gated position - Incandescent lamps
for reliable signal and wide viewing angle even in bright sun -
Solid state position sensors - Integrated circuit board and lamp
sockets completely encased in epoxy for total protection from
elements - Harnessess have watertight locking connectors -
Attractive brushed metal, engraved escutcheon plate willfit into
any pump panel decor. To order VPI kit with valve, add
suffix #92 to valve model number; i.e., 2925G-01-01-92
|
 |
|
|
|
|